PJ1 Fast Black Satin Finish 0753433

Ref: 2215

Unlike other paints, PJ1 coatings are specialized. Please follow the simple instructions to yield the best result.

Step 1: Clean Surface and remove rust, wax, grease and dirt. Lightly sand gloss surfaces

Step 2: Ensure can, surface and ambient temperature are between 70° and 95°F (24° - 35°C). Shake can vigorously for one minute after mixing ball rattles

Step 3: Test a small area to ensure compatibility

Step 4: Hold can upright 12 to 16 inches (30 to 40 CM) away from surface being sprayed. Apply thin even coats in 10 minute intervals

Step 5: Clean spray button immediately after use by turning can upside down and pressing spray button until no paint comes out

Step 6: Dries to touch in 2 to 4 hours. Cures in 24 to 36 hours