PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Aprilia Parts > Aprilia RX 125 SX 125 1995-1998  > Aprilia RX125 Air Filter/ Fuel/ Carburettor
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Suzuki RGV250 Centre Crank Seal
Suzuki RGV250 Centre Crank Seal
34.99
41.99
find out more

Aprilia RS250 Centre Crank Bearing
Aprilia RS250 Centre Crank Bearing
24.99
29.99
find out more

Aprilia RS125 Moto RRT Tail Tidy 2006-2014
Aprilia RS125 Moto RRT Tail Tidy 2006-2014
46.80
56.16
find out more

Yamaha TDR250 Exhaust Crush Ring
Yamaha TDR250 Exhaust Crush Ring
10.29
12.35
find out more

Yamaha TZR250 Exhuast Gasket Outer
Yamaha TZR250 Exhuast Gasket Outer
2.30
2.76
find out more

 

Aprilia RX125 Air Filter/ Fuel/ Carburettor



Aprillia RX125 Dellorto 34mm Carburettor 1995-1998

Aprillia RX125 Dellorto 34mm Carburettor 1995-1998

Dellorto Carburettor 34mm To Fit The Aprilia RX 125 1995 - 1998

This is a Proper 34mm Carb to fit the Aprilia RX125 It Has The Oil Feed Pipe Fitting,The Slide To Fit The RS125 Throttle Cable.

It Comes With 160 Main Jet, Pilot Jet 40 And a K57 Needle,This Should Be Suitable For Most Std RS125

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

Note: To Get The Best Out Of This Carb You Will Need To Be Running A Derestricted Exhaust With No Catalytic Converter. Pipe Routing
Price: 165.50 (198.60 Including VAT at 20%)



Quantity:  






Aprilia RX125 Flat Slide Dellorto 34mm Racing carburettor 1995-1998

Aprilia RX125 Flat Slide Dellorto 34mm Racing carburettor 1995-1998

Dellorto Racing Carburettor 34mm To Fit The Aprilia RX125 1995-1998

It Has The Oil Feed Pipe Fitting,The Slide Top To Fit The RX125 Throttle Cable.

It Comes With, 160 Main Jet, Pilot Jet 40 And a K57 Needle

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

The "VHSB34 Racing Carb" Is A Special design Racing carburettor originally used on the World Championship winning Aprilias.

Fitted with alloy "racing " top, rectangular slide and insert to reduce air turbulence above the slide and improving carburation efficiency and engine power.

The photo below shows the Std Carb On The Left V The Racing Carb On The Right


Price: 251.93 (302.32 Including VAT at 20%)



Quantity:  






Aprilia RX125 34mm Carburettor Inlet 28 Deg Angled

Aprilia RX125 34mm Carburettor Inlet 28 Deg Angled

Inlet Manifold To Fit The 34mm Carb To The Pegaso MX 125, 125/Rally 125/Taureg 125 and the ETX 125

These Bikes Use A 28 Deg Angled Inlet, The Std RS125 One Will Not Fit As The Carb Hits The Shock.
Price: 43.75 (52.50 Including VAT at 20%)



Quantity:  






Carb Main Jet Dellorto 6mm

Carb Main Jet Dellorto 6mm

Genuine Dellorto Main Jet For Both 28mm And The 34mm Carb

Select Jet Size
   


Price: 4.68 (5.62 Including VAT at 20%)



Quantity:  






Aprilia RX125 Reeds

Aprilia RX125 Reeds

This is a set of replacment reed valves to fit the Aprilia RX 125

These reeds are made in Italy by Adige the same company that supply them for Aprilia.

Replaces Aprilia Part Number: AP0224430
Price: 33.01 (39.61 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Water Pump O-Ring
2. Aprilia RS125 Gearbox Bearings
3. Aprilia RS125 Oil Pump Drive Gear



RX125 Boyesen Reed Valves

RX125 Boyesen Reed Valves

This Is A Set Of Boyesen Dual Stage Reed Valve Petels To Fit The RX125 1993 Onwards

You Will Get Better Throttle Response When You Fit These To Your Bike.

Comes With Fitting Instructions.

No Need To Re-Jet When You Fit Them
Price: 31.50 (37.80 Including VAT at 20%)



Quantity:  






Aprilia RX125 V-Force 3 Reed Valve System

Aprilia RX125 V-Force 3 Reed Valve System

This Is A Moto Tassinari V-Force 3 Reed Valve System For The Aprilia RX125 Fits All Years.

You Will Get Much Much Better Throttle Response When You Fit This, One Of the Best Mods You Can Do To Your RX125

The VForce reed valve system is thoroughly tested on the dyno and in real world racing conditions to ensure both maximum performance and durability are acheived before it hits the shelves.

You Get What You See In the Photo, Reed Block With Reeds Fitted, Gaskets And A Sticker.

Info On How To Fit
Price: 124.99 (149.99 Including VAT at 20%)



Quantity:  






V-FORCE-3 Replacement Reeds

V-FORCE-3 Replacement Reeds

This Is A Set Of Replacement Reeds For The Aprilia RX125 V-Force3 Reed Valve System.

These Will Not Fit On The STD RX125 Reed Valve They Are Only For V-Force-3 !
Price: 39.50 (47.40 Including VAT at 20%)



Quantity:  






Fuel Filter 7mm

Fuel Filter 7mm

Clear Plastic Fuel Filter With A 7mm Outside Diameter Tail
Price: 1.15 (1.38 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Fuel Pipe 6.5mm Bore Purple
2. Cagiva Mito Carb Main Jet Dellorto
3. Fuel Pipe Quick Connector 6mm



Customer Reviews

    high quality   (29/03/2013) -



Fuel Pipe 6.5mm Bore

Fuel Pipe 6.5mm Bore

Ariete Fuel Line 6.5mm Bore 11mm Outer Diameter, Colour: Purple!!

Unleaded fuel resistant inner tube with durable, heat resistant outer. The translucent tube resists shrinking and remains flexible. As used by GP teams.

Supplied in 1m length


Price: 6.75 (8.10 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Fuel Filter 7mm
2. Oil Pipe 3mm x 5mm Clear
3. Aprilia RS125 Front Brake Pads 1992-2005



Customer Reviews

  Good Service     (17/02/2015) Lee -


    good quality part   (29/03/2013) -



Aprilia RX125 Oil Supply Pipe Green

Aprilia RX125 Oil Supply Pipe Green

Oil Line Colour: Green!!

Aprilia RX125 Oil Supply pipe. This to go from the oil tank to the oil pump, and will replace your old hard and brittle one.

Supplied in 1m length


Price: 4.50 (5.40 Including VAT at 20%)



Quantity:  






Aprilia RX125 Oil Supply Pipe Black

Aprilia RX125 Oil Supply Pipe Black

Oil Line Colour: Black

Aprilia RX125 Oil Supply pipe. This to go from the oil tank to the oil pump, and will replace your old hard and brittle one.

Supplied in 1m length


Price: 4.50 (5.40 Including VAT at 20%)



Quantity:  






Aprillia RX125 Oil Feed Pipe Black

Aprillia RX125 Oil Feed Pipe Black

Aprillia RX125 Oil Feed Black Pipe

This is the pipe that goes from the oil pump to the carb, and will replace your hard and brittle one.

Supplied in 1m length
Price: 3.50 (4.20 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. RS125 Vacuum Tap Fitting VHST



Aprillia RX125 Oil Feed Pipe Clear

Aprillia RX125 Oil Feed Pipe Clear

Aprillia RX125 Oil Feed Clear Pipe

This is the pipe that goes from the oil pump to the carb, and will replace your hard and brittle one.

Supplied in 1m length


Price: 3.50 (4.20 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Fuel Filter 7mm
2. Fuel Pipe 6.5mm Bore Purple
3. Aprillia RS125 Clutch Tool



Customer Reviews

  Good product  Fits perfect and holds up very good.   (05/11/2013) Fredrik Frostad - Norway


  Nice clear pipe  Fits like the original pipe!   (17/04/2013) -





PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Aprilia RS125 Aluminium Fuel Tank Bolt
Aprilia RS125 Aluminium Fuel Tank Bolt

2.00
2.40
find out more

Aprilia RS125 Aluminium Fuel Tank Cup Washer
Aprilia RS125 Aluminium Fuel Tank Cup Washer

4.50
5.40
find out more

Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type
Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type

5.99
7.19
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design