PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here:
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing
Engine Packing

online store

Aprilia RS125 Italkit Adjustable Pneumatic Power Valve
Aprilia RS125 Italkit Adjustable Pneumatic Power Valve
125.00
150.00
find out more

Honda MTX125 Water Pump Seal Kit
Honda MTX125 Water Pump Seal Kit
20.31
24.37
find out more

Yamaha DT125R EBC Dirt Racer Clutch Kit
Yamaha DT125R EBC Dirt Racer Clutch Kit
49.16
58.99
find out more

Yamaha TY175 Con Rod Kit Moto RRT
Yamaha TY175 Con Rod Kit Moto RRT
31.50
37.80
find out more

Kawasaki KX85 Athena Full Gasket And Seal Kit 2014-2019
Kawasaki KX85 Athena Full Gasket And Seal Kit 2014-2019
73.56
88.27
find out more


NewsNews
Friday, 01 November 2019

Wow long time since an up-date!

We have had to increases the cost of shipping across all country’s , we have also increased the minim order value to £15.00 + tax and the free shipping is now over £250.00 + tax for UK. There are a few reasons why, mainly the costs we are charged by Royal Mail, Parcel Force, DPD GLS ETC have all gone up and we just absorbed them but now the cost of the packing and the processing of the orders has also increased so we have no choice but to pass this on

Thursday, 10 March 2016

We have stopped offering cylinder re-coating as a service, this was one of the services that part of the work was sub contracted out (the coating part) turnaround time was getting longer and longer and there were on some occasions issues with quality. We felt we could not offer an acceptable service that our customers have come to expect from us so have dropped this service.

Wednesday, 11 September 2013

We have changed our opening times to Monday - Friday 9am Till 5:30pm

Sorry But Due To Admin Costs We Have Had To Set A Minimum Order Value Of £10.00 + Vat. It Is Just Not Viable To Process An Order For Anything Less Than This.

Unfortunately as of Wednesday, 25 April 2012 we have stopped rebuilding engines therefore are no longer taking on any engine rebuilding work for the foresee able future.

We are still continuing to carry out all re-bore, re-sleeving, re-plating and crank re-building work

Tuesday, 16 February 2010

Updated To A New Version Of The Software,

. For Faster & More Accurate Search Results

. Faster Card Payments With "Actinic Payments"

. Better Shipping Rates For Most Of The World

. Link To The Forum Added

Wednesday, 08 April 2009

We have changed server to a faster one which should speed up the buying process; we have also improved the security even more so it is even safer to shop now.

Friday, 13 March 2009

Added more Yamaha RD350lc parts, also set up a Gilera section and added SC125 and GSM50 Bikes.

I will be adding more general parts over the next few weeks.

February 7, 2009

I have now sorted the Tax / Vat so if you live outside of the Europe the Vat will be automatically removed in the checkout area, This applies to country's like the USA, Norway, Channel islands.

December 11 2008 new version website launched, hopefully this version is easier to navigate.

Still got lots of parts to add over the coming months, will be looking at shipping cost as well, we always try and keep the shipping costs down as low as possible but sometimes shipping to places like Norway, Sweden the costs can be quite high.



PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Dellorto VHSB 34LD Pilot Jet
Dellorto VHSB 34LD Pilot Jet

7.95
9.54
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns| Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2012