PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Aprilia Parts > Aprilia SX 125 2008 Onwards  > Aprilia SX125 Air Filter/ Fuel/ Carburettor
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Aprilia RS125 Italkit Adjustable Pneumatic Power Valve
Aprilia RS125 Italkit Adjustable Pneumatic Power Valve
125.00
150.00
find out more

Honda MTX125 Water Pump Seal Kit
Honda MTX125 Water Pump Seal Kit
20.31
24.37
find out more

Yamaha DT125R EBC Dirt Racer Clutch Kit
Yamaha DT125R EBC Dirt Racer Clutch Kit
49.16
58.99
find out more

Yamaha TY175 Con Rod Kit Moto RRT
Yamaha TY175 Con Rod Kit Moto RRT
31.50
37.80
find out more

Kawasaki KX85 Athena Full Gasket And Seal Kit 2014-2019
Kawasaki KX85 Athena Full Gasket And Seal Kit 2014-2019
73.56
88.27
find out more

 

Aprilia SX125 Air Filter/ Fuel/ Carburettor



Aprillia SX125 Dellorto 34mm Carburettor 2008 Onwards

Aprillia SX125 Dellorto 34mm Carburettor 2008 Onwards

Dellorto Carburettor 34mm To Fit The Aprilia SX125 2008 Onwards

This is a Proper 34mm Carb to fit the Aprilia SX125 It Has The Oil Feed Pipe Fitting,The Slide To Fit The SX125 Throttle Cable.

It Comes With 160 Main Jet, Pilot Jet 40 And a K57 Needle,This Should Be Suitable For Most Std SX 125

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

Note: To Get The Best Out Of This Carb You Will Need To Be Running A Derestricted Exhaust With No Catalytic Converter. Pipe Routing
Price: 165.50 (198.60 Including VAT at 20%)



Quantity:  






Aprilia SX125 Flat Slide Dellorto 34mm Racing carburettor 2008 Onwards

Aprilia SX125 Flat Slide Dellorto 34mm Racing carburettor 2008 Onwards

Dellorto Racing Carburettor 34mm To Fit The Aprilia SX125 2008 Onwards

It Has The Oil Feed Pipe Fitting,The Slide Top To Fit The SX 125 Throttle Cable.

It Comes With, 160 Main Jet, Pilot Jet 40 And a K57 Needle

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

The "VHSB34 Racing Carb" Is A Special design Racing carburettor originally used on the World Championship winning Aprilias.

Fitted with alloy "racing " top, rectangular slide and insert to reduce air turbulence above the slide and improving carburation efficiency and engine power.

The photo below shows the Std Carb On The Left V The Racing Carb On The Right


Price: 251.93 (302.32 Including VAT at 20%)



Quantity:  






Aprilia SX125 34mm Carburettor Inlet 28 Deg Angled

Aprilia SX125 34mm Carburettor Inlet 28 Deg Angled

Inlet Manifold To Fit The 34mm Carb To The Pegaso SX 125, 125/Rally 125/Taureg 125 and the ETX 125

These Bikes Use A 28 Deg Angled Inlet, The Std RS125 One Will Not Fit As The Carb Hits The Shock.
Price: 43.75 (52.50 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia SX 125 Throttle Cable 860713
3. Aprilia SX125 Oil Feed Pipe Clear



Carb Main Jet Dellorto 6mm

Carb Main Jet Dellorto 6mm

Genuine Dellorto Main Jet For Both 28mm And The 34mm Carb


   


Price: 4.68 (5.62 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia SX125 V-Force 3 Reed Valve System
2. Fuel Filter 7mm



SX125 Boyesen Reed Valves

SX125 Boyesen Reed Valves

This Is A Set Of Boyesen Dual Stage Reed Valve Petels To Fit The SX 125 2008 Onwards

You Will Get Better Throttle Response When You Fit These To Your Bike.

Comes With Fitting Instructions.

No Need To Re-Jet When You Fit Them
Price: 36.25 (43.50 Including VAT at 20%)



Quantity:  






Aprilia SX125 V-Force 3 Reed Valve System

Aprilia SX125 V-Force 3 Reed Valve System

This Is A Moto Tassinari V-Force 3 Reed Valve System For The Aprilia SX125 Fits All Years.

You Will Get Much Much Better Throttle Response When You Fit This, One Of the Best Mods You Can Do To Your SX125

The VForce reed valve system is thoroughly tested on the dyno and in real world racing conditions to ensure both maximum performance and durability are acheived before it hits the shelves.

You Get What You See In the Photo, Reed Block With Reeds Fitted, Gaskets And A Sticker.


Price: 124.99 (149.99 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Carb Main Jet Dellorto 6mm
2. Fuel Filter 7mm



V-FORCE-3 Replacement Reeds

V-FORCE-3 Replacement Reeds

This Is A Set Of Replacement Reeds For The Aprilia SX125 V-Force3 Reed Valve System.

These Will Not Fit On The STD RX125 Reed Valve They Are Only For V-Force-3 !
Price: 46.65 (55.98 Including VAT at 20%)



Quantity:  






Fuel Filter 7mm

Fuel Filter 7mm

Clear Plastic Fuel Filter With A 7mm Outside Diameter Tail
Price: 1.55 (1.86 Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Fuel Pipe 6.5mm Bore Purple
2. Suzuki GT750 Crankshaft Main Bearing With Shield #22
3. Chain Spliter Heavy Duty Type



Customer Reviews

    high quality   (29/03/2013) -



Fuel Pipe 6.5mm Bore Purple

Fuel Pipe 6.5mm Bore Purple

Ariete Fuel Line 6.5mm Bore 11mm Outer Diameter, Colour: Purple

Unleaded fuel resistant inner tube with durable, heat resistant outer. The translucent tube resists shrinking and remains flexible. As used by GP teams.

Supplied in 1m length

Mainly used on 125cc bikes Like the Aprilia RS125 & Most Motocross Bikes.


Price: 6.75 (8.10 Including VAT at 20%)



Quantity:  






Customer Reviews

  Good Service     (17/02/2015) Lee -


    good quality part   (29/03/2013) -



Aprilia SX125 Oil Supply Pipe Green

Aprilia SX125 Oil Supply Pipe Green

Oil Line Colour: Green!!

Aprilia SX125 Oil Supply pipe. This to go from the oil tank to the oil pump, and will replace your old hard and brittle one.

Supplied in 1m length


Price: 4.50 (5.40 Including VAT at 20%)



Quantity:  






Aprilia SX125 Oil Supply Pipe Black

Aprilia SX125 Oil Supply Pipe Black

Oil Line Colour: Black

Aprilia SX125 Oil Supply pipe. This to go from the oil tank to the oil pump, and will replace your old hard and brittle one.

Supplied in 1m length


Price: 4.50 (5.40 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia SX 125 Throttle Cable 860713
3. Aprilia SX125 Oil Feed Pipe Clear



Aprilia SX125 Oil Feed Pipe Black

Aprilia SX125 Oil Feed Pipe Black

Oil Feed Pipe Black 2mm Bore x 5mm Outside Diameter

Supplied in 1m length
Price: 3.50 (4.20 Including VAT at 20%)



Quantity:  






Aprilia SX125 Oil Feed Pipe Clear

Aprilia SX125 Oil Feed Pipe Clear

Oil Feed Pipe Clear 2mm Bore x 5mm Outside Diameter

Supplied in 1m length


Price: 3.50 (4.20 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Aprilia RS125 Carb Main Jet Dellorto 6mm
2. Aprilia SX 125 Throttle Cable 860713
3. Aprilia SX125 34mm Carburettor Inlet 28 Deg Angled



Customer Reviews

  Good product  Fits perfect and holds up very good.   (05/11/2013) Fredrik Frostad - Norway


  Nice clear pipe  Fits like the original pipe!   (17/04/2013) -





PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Fuel Pipe 6.5mm Bore Purple
Fuel Pipe 6.5mm Bore Purple

6.75
8.10
find out more

Dellorto VHSB 34LD Pilot Jet
Dellorto VHSB 34LD Pilot Jet

7.95
9.54
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design