PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Aprilia Parts > Aprilia Tuono 125 > Aprilia Tuono 125 Air Filter/ Fuel / Carburettor
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Aprilia RS125 Rear Master Cylinder Complete
Aprilia RS125 Rear Master Cylinder Complete
47.50
57.00
find out more

Aprilia Tuono 125 Racing Cylinder Base Nut
Aprilia Tuono 125 Racing Cylinder Base Nut
4.50
5.40
find out more

Gilera CX125 Piston Kit
Gilera CX125 Piston Kit
155.00
186.00
find out more

Aprilia RS125 Clutch Kit Surflex
Aprilia RS125 Clutch Kit Surflex
72.45
86.94
find out more

Aprilia RS125 Balance Shaft Retaining Screw
Aprilia RS125 Balance Shaft Retaining Screw
2.50
3.00
find out more

 

Aprilia Tuono 125 Air Filter/ Fuel / Carburettor



Aprilia Tuono 125 Flat Slide Dellorto 34mm Racing carburettor 1993 to 2005

Aprilia Tuono 125 Flat Slide Dellorto 34mm Racing carburettor 1993 to 2005

Dellorto Racing Carburettor 34mm To Fit The Aprilia Tuono

It Has The Oil Feed Pipe Fitting,The Slide Top To Fit The Tuono 125 Throttle Cable.

It Comes With, 160 Main Jet, Pilot Jet 40 And a K57 Needle

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

The "VHSB34 Racing Carb" Is A Special design Racing carburettor originally used on the World Championship winning Aprilias.

Fitted with alloy "racing " top, rectangular slide and insert to reduce air turbulence above the slide and improving carburation efficiency and engine power.

The photo below shows the Std Carb On The Left V The Racing Carb On The Right


Price: 251.93 (302.32 Including VAT at 20%)



Quantity:  






Aprillia Tuono 125 Dellorto 34mm Carburettor 1993 to 2005

Aprillia Tuono 125 Dellorto 34mm Carburettor 1993 to 2005

Dellorto Carburettor 34mm To Fit The Aprilia Tuono 125 1993 - 2005

This is a Proper 34mm Carb to fit the Aprilia Tuono 125 It Has The Oil Feed Pipe Fitting,The Slide To Fit The RS125 Throttle Cable.

It Comes With 160 Main Jet, Pilot Jet 40 And a K57 Needle,This Should Be Suitable For Most Std Tuono 125

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

Note: To Get The Best Out Of This Carb You Will Need To Be Running A Derestricted Exhaust With No Catalytic Converter. Pipe Routing
Price: 165.50 (198.60 Including VAT at 20%)



Quantity:  






Aprillia Tuono 125 Dellorto 34mm Carburettor 2006 Onwards

Aprillia Tuono 125 Dellorto 34mm Carburettor 2006 Onwards

Dellorto Carburettor 34mm To Fit The Aprilia Tuono 125 2006 Onwards

This is a Proper 34mm Carb to fit the Aprilia RS125 It Has The Oil Feed Pipe Fitting,The Slide To Fit The Tuono 125 Throttle Cable.

It Comes With 160 Main Jet, Pilot Jet 40 And a K57 Needle,This Should Be Suitable For Most Std Tuono 125

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

Note: To Get The Best Out Of This Carb You Will Need To Be Running A Derestricted Exhaust With No Catalytic Converter. Pipe Routing
Price: 171.28 (205.54 Including VAT at 20%)



Quantity:  






Aprilia Tuono 125 Flat Slide Dellorto 34mm Racing carburettor 2006 Onwards

Aprilia Tuono 125 Flat Slide Dellorto 34mm Racing carburettor 2006 Onwards

Dellorto Racing Carburettor 34mm To Fit The Aprilia Tuono 125 2006 Onwards

It Has The Oil Feed Pipe Fitting,The Slide Top To Fit The Tuono 125 Throttle Cable.

It Comes With, 160 Main Jet, Pilot Jet 40 And a K57 Needle

You will Need A New Inlet Manifold To Fit This If You Are Replacing The STD 28mm Carb

The "VHSB34 Racing Carb" Is A Special design Racing carburettor originally used on the World Championship winning Aprilias.

Fitted with alloy "racing " top, rectangular slide and insert to reduce air turbulence above the slide and improving carburation efficiency and engine power.

The photo below shows the Std Carb On The Left V The Racing Carb On The Right


Price: 257.70 (309.24 Including VAT at 20%)



Quantity:  








PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type
Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type

5.99
7.19
find out more

Aprilia RS125 Aluminium Fuel Tank Cup Washer
Aprilia RS125 Aluminium Fuel Tank Cup Washer

4.50
5.40
find out more

Dellorto VHSB 34LD Pilot Jet
Dellorto VHSB 34LD Pilot Jet

7.95
9.54
find out more

Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design