PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Suzuki Parts > Suzuki GT750  > Suzuki GT750 Bottom End Engine Parts
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Aprilia RS125 Rear Master Cylinder Complete
Aprilia RS125 Rear Master Cylinder Complete
32.50
39.00
find out more

Yamaha DT125R Gudgeon Pin
Yamaha DT125R Gudgeon Pin
4.40
5.28
find out more

Gilera CX125 Piston Kit
Gilera CX125 Piston Kit
155.00
186.00
find out more

Aprilia RS125 Clutch Kit Surflex
Aprilia RS125 Clutch Kit Surflex
72.45
86.94
find out more

Aprilia RS125 Balance Shaft Retaining Screw
Aprilia RS125 Balance Shaft Retaining Screw
2.50
3.00
find out more

 

Suzuki GT750 Bottom End Engine Parts



Suzuki GT750 Crankshaft Rebuild Service

Suzuki GT750 Crankshaft Rebuild Service

We Carry Out Crankshaft Rebuilds For The Suzuki GT750 Here At Pjme

The Suzuki GT 750 Like Most 2 Strokes Has A Pressed Together Crankshaft Assembly, But Unlike Most Two Stroke Cranks The Gt750 Crank Is Quite A Big Heavy Crank That Requires Time Most Importantly Experience To Build It Correctly.

With A Standard Crankshaft Build We Strip All The Components Of The Crankshaft Clean And Inspect For Cracks Then Replace The Following Parts, Con Rods, Big End Bearings, Thrust Washers, Small End Bearing, All 4 Main Bearings And 5 Crank Seals. All The Parts Are New And Are High Quality Parts Made In Ie Koyo / Hic Bearings, Mitaka Brand Con Rods Ars Seals From Japan Etc.

We Then Build The Crank On A Jig Which Ensures The Crank Is Phased, The Whole Assembly Is Then Trued By Hand. The Crank Is Ready To Be Dropped Into The Crankcases.

The Price For A Standard Crank Rebuild Is £599 + Vat

Please Get In Touch If You Need This Service.Telephone: 01902 307457

Mobile Number For WhatsApp Messaging: 07884274838

Email Us Click Here websales@pjme.co.uk








Suzuki GT750 Crank Seal Kit

Suzuki GT750 Crank Seal Kit

This is a set of 5 cranks seals for the Suzuki GT750
Price: 52.50 (63.00 Including VAT at 20%)



Quantity:  






Suzuki GT750 Crankshaft Main Bearings

Suzuki GT750 Crankshaft Main Bearings

Set Of 4 Replacement Main Bearing To Fit The Suzuki GT750 Crankshaft.

These Are Quality Bearings Made In Taiwan. All The Bearings Are The Same And Have Groves In Them; They Don't Have The Provision To Run The Oil Thrower Plate.


Price: 150.00 (180.00 Including VAT at 20%)



Quantity:  






Suzuki GT750 Con Rod Kit

Suzuki GT750 Con Rod Kit

This Is a replacement cond rod kit for the Suzuki GT750

You Get 1 Crank Pin, 1 Con Rod, 1 Big End Bearing, 2 Thrust Washers &1 Small End Bearing
Price: 74.90 (89.88 Including VAT at 20%)



Quantity:  






Suzuki GT750 Full Gasket Kit Budget Type

Suzuki GT750 Full Gasket Kit Budget Type

Full Gasket Kit To Fit The Suzuki GT750 Fits All Years

Budget Type Made In Taiwan


Price: 46.56 (55.87 Including VAT at 20%)



Quantity:  






Suzuki GT750 Full Gasket Athena Top Qualty

Suzuki GT750 Full Gasket Athena Top Qualty

Full Gasket Set For A Suzuki GT750 All Years

This Kit Is Made In Italy By Athena And Is A Better Quality One Than The Budget One We Sell Which Is Made In Taiwan. "Why is it better i hear you say" Well the gaskets are made from the same material as the factory original ones, the gasket material is better than the Taiwanese one and fits much nicer.

Made In Italy By Athena


Price: 55.00 (66.00 Including VAT at 20%)



Quantity:  




People who bought this item also bought:
1. Suzuki GT 750 Piston Kit Set
2. Suzuki GT750 Small End Bearing



Suzuki GT750 Flywheel Removal Tool

Suzuki GT750 Flywheel Removal Tool

Tool For Removal Of The Suzuki GT750 Ignition Rotor

This Tool Has Many Fitments

It Has A M27x 1.00 LH External Thread That Fits Most Japanese Engines Like RD125LC RD350LC ETC.

It Has A M24x1.00 RH External Thread

M10x1.25 RH External Thread, This Fits Yamaha RD350 Flywheel Yamaha RD400 Ignition Rotors And Suzuki GT750 Amongst Others

M14x1.5. RH External Thread

M16x1.5 RH External Thread

M18x1.5 RH External Thread


Price: 21.00 (25.20 Including VAT at 20%)


Quantity:  








PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type
Aprilia RS125 Moto RRT Oil Filler Plug Alloy Type

5.99
7.19
find out more

Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Engine Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design