PJME - Motorcycle Engineers , 2 stroke engine specialist aprilia cagiva
homeAbout UsShipping & ReturnsContact UsNewsForumlogin twitterfacebook
You Are Here: Online Parts Store > Road Bike Parts > Suzuki Parts > Suzuki RG125 Gamma > Suzuki RG 125 Gamma Engine Parts Bottom End
online store

Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Thread Repairs
Engine Rebuilding
Job Packing

Aprilia SX125 Swing Arm Needle Bearing
Aprilia SX125 Swing Arm Needle Bearing
8.90
10.68
find out more

Aprilia RX125 Rear Shock Bearing
Aprilia RX125 Rear Shock Bearing
8.50
10.20
find out more

Suzuki GT550 Con Rod Kit
Suzuki GT550 Con Rod Kit
57.65
69.18
find out more

Kawasaki KR1S Centre Crank Seal
Kawasaki KR1S Centre Crank Seal
14.43
17.32
find out more

Aprilia RS125 Sprocket Carrier Circlip 2006-2014 #9
Aprilia RS125 Sprocket Carrier Circlip 2006-2014 #9
5.76
6.91
find out more

 

Suzuki RG 125 Gamma Engine Parts Bottom End









Suzuki RG125 Gamma Crankshaft Rebuild

Suzuki RG125 Gamma Crankshaft Rebuild

We Carry Out Crankshaft Rebuilds For The Suzuki RG125 Here At PJ Motorcycle Engineers.

The Price For A Full Crank Rebuild On RG 125 Crank Is £83.38 + VAT

With A Standard Crankshaft Build We Strip All The Components Of The Crankshaft Clean And Inspect For Cracks Then Rebuilt With All New Parts IE Crank Pin, Con Rod, Big End Bearing And Small End Bearing.

The Crank Is Built And The Whole Assembly Is Then Trued By Hand And Is Ready To Be Fitted Into The Crankcase.

The Parts We Use Are The Same High Quality Parts We Sell IE Long Brand OR Mitaka Con Rods Kits, Koyo Bearings Etc

Please Get in Touch If You Need This Serivce.Telephone: 01902 307457

Mobile Number For WhatsApp Messaging: 07884274838

Email Us Click Here websales@pjme.co.uk








Suzuki RG125 Gamma Con Rod Kit

Suzuki RG125 Gamma Con Rod Kit

This con rod kit will fit The Suzuki RG125 Gamma 1985-1991

Kit contains con-rod, crank pin, big end cage, big end rollers, and small end bearing.

The Con Rod Kit Is Made In Japan So The Quality Is Very Good !
Price: 43.38 (52.06 Including VAT at 20%)



Quantity:  






Suzuki RG125 Gamma Crankshaft Main Bearings

Suzuki RG125 Gamma Crankshaft Main Bearings

Pair Of Crankshaft Main Bearings For The Suzuki RG125 Gamma 1985-1991
Price: 17.84 (21.41 Including VAT at 20%)



Quantity:  






Suzuki RG125 Gamma Crankshaft Oil Seals

Suzuki RG125 Gamma Crankshaft Oil Seals

Pair Of Crankshaft Oil Seals To Fit The Suzuki RG125 Gamma 1985-1991
Price: 10.00 (12.00 Including VAT at 20%)



Quantity:  






Suzuki RG125 Gamma Full Gasket Kit

Suzuki RG125 Gamma Full Gasket Kit

Full Gasket Set To Fit The Suzuki RG125 Gamma 1985-1991
Price: 12.50 (15.00 Including VAT at 20%)



Quantity:  






Suzuki RG125  Big End Bearing

Suzuki RG125 Big End Bearing

Replacement Big End Bearing For The Suzuki RG125, Fits All Models and years Of The RG 125 With a 54mm Bore As Std.

The Big End Bearing Is A Silver Plated Flat Bar Race Type.

Replaces Suzuki Part Numbers 0926322060 & 09263-22047-0C0


Price: 18.75 (22.50 Including VAT at 20%)





Quantity:  






Suzuki RG125 Big End Bearing Thrust Washer

Suzuki RG125 Big End Bearing Thrust Washer

Big End Bearing Thrust Washer For The Suzuki RG125 , Fits All Models and years Of The Suzuki RG125 With The 54mm Std.

There Are 2 of these washers on the Suzuki RG 125 Crankshaft

Suzuki Part Number 09160 22070

Price Is For 1 Washer


Price: 4.50 (5.40 Including VAT at 20%)





Quantity:  








PJ Motorcycle Engineers - Specialists in 2 Stroke Engines


Aprilia RS125 Carb Main Jet Dellorto 6mm
Aprilia RS125 Carb Main Jet Dellorto 6mm

4.68
5.62
find out more

Fuel Pipe 6.5mm Bore Purple
Fuel Pipe 6.5mm Bore Purple

6.75
8.10
find out more

Aprilia RS125 Aluminium Fuel Tank Bolt
Aprilia RS125 Aluminium Fuel Tank Bolt

2.00
2.40
find out more


PJME Home
About Us
Contact Us
Links Page
News
General Shipping & Returns Information
Privacy Policy
Online Security
Cagiva 125
Yamaha RD350 LC
Yamaha RD350 YPVS
Cylinder Re-Sleeving
Cylinder Re-Coating
Cylinder Re-Boring
Crankshaft Rebuilding
Engine Rebuilding
Cylinder Packing
Aprilia RS125
Home | About Us | Shipping & Returns | Terms & Conditions | Contact Us | Site Map | Search | Links & Resources

© Copyright PJME 2008-2013

Actinic Web Design maintained by Hanson Web Design